2-3FGB
PN16
2F and 3F series valves are used to control fluids belonging to the group showed in the table according to article 13 of 2014/68/UE directive (PED) in air-conditioning, thermoventilation and heating plants and in industrial processes; therefore, they cannot be employed as safety valves
2FGB
3FGB
2FGB.L
3FGB.L
2-3FGB.L
PN16
2-3FGB.L series valves are used to control fluids belonging to the group 2 in accordance to article 13 of 2014/68/UE (PED) directive, in air-conditioning, thermoventilation and heating plants and in industrial processes; therefore, they cannot be used as safety valves. 2-3FGB.L series valves are designed to offer a tight close-off both on direct way as well as on angle way ports. This performance is obtained through the use of PTFE sealing
2FGA
PN16
2F.. series valves are used to control fluids belonging to the group showed in the table according to article 13 of 2014/68/UE directive (PED) in air-conditioning, thermoventilation and heating plants and in industrial processes; therefore, they cannot be employed as safety valves.
2FGA
3FIA
2-3FIA
PN16
3FIA range consists in 3-way valve bodies to be assembled with electrical bidirectional actuator. 3FIA valves are 3-way mixing (diverting) valves for industrial use; they offer high performances with many types of fluid within a wide range of temperatures. Valves are delivered after testing and calibration and ready for a long utilize, without maintenance. 3FIA.. valves are used to control fluids in accordance to article 13 of 2014/68/UE (PED) directive, in heating and cooling installations and in industrial processes; they cannot be used as safety valves.
2-3FSA
PN25
2F and 3F series valves are used to control fluids belonging to the group showed in the table in accordance to article 13 of 2014/68/UE (PED) directive, in air-conditioning, thermoventilation and heating plants and in industrial processes; therefore, they cannot be used as safety valves.
2FSA
3FSA
2FSA.B
2FSA.B
PN25
2FSA.B balanced valve bodies are designed to use in air-conditioning, thermoventilation and heating systems and in industrial process systems; they cannot be used as safety valves. They can be employed to control fluids belonging to groups 1 and 2 (see table above) according to the article 13 of 2014/68/UE directive (PED). In particular Group 1 includes just diathermic oil; Group 2 includes water, overheated water, steam. For fluids different from the ones listed above, please contact our Sales Support. The peculiar characteristic of such valves is they can operate under high close off pressure and wherever low leakage is required. This makes them particularly suitable in applications with high pressure and high DeltaT, such as overheated water (i.e. remote control, boiler supply) and steam.
3FSA.S
PN25
3F series valves are used to control fluids belonging to the group showed in the table in accordance to article 13 of 2014/68/UE (PED) directive, in air-conditioning, thermoventilation and heating plants and in industrial processes; therefore, they cannot be used as safety valves.
3FSA.S
2FAA
3FAA
2-3FAA
PN40
2F and 3F series valves are used to control fluids belonging to the group showed in the table according to article 13 of 2014/68/UE directive (PED) in air-conditioning, thermoventilation and heating plants and in industrial processes; therefore, they cannot be employed as safety valves
2-3FAA.P
PN40
2F and 3F series valves are used to control fluids belonging to the group showed in the table according to article 13 of 2014/68/UE directive (PED) in air-conditioning, thermoventilation and heating plants and in industrial processes; therefore, they cannot be employed as safety valves
2FAA.P
3FAA.P
2FAA.B
2-3FAA.B
PN40
2-3FAA.B balanced valve bodies are designed for use in air-conditioning, thermoventilation and heating systems and in industrial process and they cannot be used as safety valves. They can be employed to control fluids belonging to group 2 according to the article 13 of 2014/68/UE directive (PED). Group 2 includes water, overheated water, steam. For fluids belonging to group 2 differing from the ones listed above, please contact our Sales Support. The peculiar characteristic of such valves is they can operate under high close off pressure and wherever low leakage is required. This makes them particularly suitable in applications with high pressure and high DT, such as overheated water (i.e. remote control, boiler supply) and steam.